![]() ![]() Give the name of the "drive letter" as an argument of the disk to be formatted. To format a floppy disk for DOS, writing an empty MS-DOS filesystem to the disk in the process, use mformat, which is in the mtools package: aptitude install mtools Then format the floppy: mkfs.msdos /dev/fd0 mke2fs /dev/fd0įirst, you will need to install the dosfstools package: aptitude install dosfstools If you want a blank Linux formatted floppy, then you can use the command mke2fs. If you are using the second floppy drive, then just replace /dev/fd0 with /dev/fd1 in these instructions. The first floppy drive in Linux is /dev/fd0 and the second one is /dev/fd1. Transferring files between amiga and PC is another topic, and there using PC formatted 720KB floppies with CrossDOS is one option, albeit not necessarily the best one.In Linux, you can format a floppy disk as a DOS disk or a Linux disk. If you wish to format any floppies for amiga use, just format them on amiga. Unless if you go for specialized hardware you cannot write or format floppies to amiga format on a PC. Thus you can use amiga to format disks to PC format (720KB or 1.44MB if you have a HD drive), but not the other way around. The PC floppy controller is much more rigid and doesn't allow as flexible track layout as amiga (technical: Amiga can write full tracks with whatever track layout desired, PC controller cannot). It's perfectly possible to use the higher density floppies in place of the lower density ones. There are however double density (up to 1MB unformatted size) and high density (up to 2MB unformatted size) floppies (some higher density ones do exist as well, but are rather rare). The disks are exactly the same physically. ![]() I think there is a lot of confusion in this thread, and not alone from sim085.įirst of all, there are no "PC" or "amiga" floppies.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |